Sabic Noryl EXNP0012 resin is Will be commercialized as PPX615 PRELIMINARY DATA. 15% glass reinforced PPE+PP. High strength.
Property
| TYPICAL PROPERTIES (1) |
|
|
|
| MECHANICAL |
Value |
Unit |
Standard |
| Tensile Stress, yld, Type I, 5 mm/min |
62 |
MPa |
ASTM D 638 |
| Tensile Stress, brk, Type I, 5 mm/min |
62 |
MPa |
ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min |
9.3 |
% |
ASTM D 638 |
| Flexural Stress, brk, 1.3 mm/min, 50 mm span |
103 |
MPa |
ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span |
3250 |
MPa |
ASTM D 790 |
| IMPACT |
Value |
Unit |
Standard |
| Izod Impact, unnotched, 23°C |
598 |
J/m |
ASTM D 4812 |
| Izod Impact, notched, 23°C |
117 |
J/m |
ASTM D 256 |
| Instrumented Impact Total Energy, 23°C |
14 |
J |
ASTM D 3763 |
| THERMAL |
Value |
Unit |
Standard |
| HDT, 0.45 MPa, 3.2 mm, unannealed |
146 |
°C |
ASTM D 648 |
| HDT, 1.82 MPa, 3.2mm, unannealed |
123 |
°C |
ASTM D 648 |
| PHYSICAL |
Value |
Unit |
Standard |
| Specific Gravity |
1.07 |
- |
ASTM D 792 |
| Source GMD, last updated:01/09/2002 |
|
|
Processing
| THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES. |
| PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION |
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
samples. All samples tested under ISO test standards are prepared according to ISO 294. |
| (2) Only typical data for selection purposes. Not to be used for part or tool design. |
| (3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| (4) Internal measurements according to UL standards. |
S-Plastics Noryl Resin Application
|
S-Plastics Noryl PPO is modified polyphenylene oxide (PPO) resins produced by the S-Plastics company. It is known for its excellent balance of properties, including high heat resistance, dimensional stability, and chemical resistance.
Noryl PPO resins are produced by blending PPO with other materials, such as polystyrene or polyamide.S-Plastics Noryl PPO include:
1. High heat resistance: S-Plastics Noryl PPO has a high heat deflection temperature.This makes it suitable for use in high-temperature applications, such as automotive engine parts and electrical components.
2. Dimensional stability: S-Plastics Noryl PPO has a low coefficient of thermal expansion. This makes it suitable for use in applications where precision and accuracy are important.
|
|
|
3. Chemical resistance: S-Plastics Noryl PPO has good chemical resistance. It is commonly used in automotive and electrical applications where chemical resistance is important.
4. Good electrical properties: S-Plastics Noryl PPO has good electrical properties. This makes it suitable for use in electrical and electronic applications, such as connectors and switches.
5. Ease of processing: S-Plastics Noryl PPO is easy to process and can be easily molded into complex shapes with thin walls. |
Related products
Different Noryl Resin have different applications
We recommend more different kinds of PPO categories for your reference:
Company Profile
The Shenzhen Samtion Chemical Co., Ltd
Focus on the export and production support of engineering plastics and special modified materials
15 Years Experience
We are a leading supplier of top end engineering plastics raw materials.
The company is formed by a group of senior teams engaged in the sales and production of engineering plastic materials for over 15 years.
More Than 1,000 Customers
Up to now, we have provided
high-quality products and services to more than 1,000 customers in various industries, including: electronics and electrical appliances, medical, food, automotive electronics, optoelectronic communications, photovoltaic new energy, water treatment,transportation and other industries.
Quality Assurance
Every batch of our products is subject to strict quality inspection to ensure the original supply. All products have MSDS, ROHS, SGS, REACH,EU, UL, COC / COA certificates!
FAQ
1. About quality assurance
We provide all product test authoritative reports required by customers, and all products have original factory shipment certificates and qualifications. We will take full responsibility for any customer complaints caused by our product quality problems.
2. About the shipping method
We can use land transportation, sea transportation, and air transportation according to customer requirements; we can also choose logistics suppliers according to customer requirements.
3. About the payment method
T/T, Western Union, PayPal, LC, etc. are all acceptable.
4. About MOQ:
The minimum quantity of an order is dependent on different types of materials, please ask our sales representatives
5. About quotation:
You can contact oursales representatives for a quotation at any time, we promise to reply within 7-24 hours
6. About technical support
We have a large technical support team, which can provide technical support including material selection, color matching service,mold consultation, product production service, etc. according to the situation of the customer's project.
Your message must be between 20-3,000 characters!
English
