| TYPICAL PROPERTIES (1) |
|
|
|
| MECHANICAL |
Value |
Unit |
Standard |
| Tensile Stress, yld, Type I, 5 mm/min |
186 |
MPa |
ASTM D 638 |
| Tensile Stress, brk, Type I, 5 mm/min |
179 |
MPa |
ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min |
2.5 |
% |
ASTM D 638 |
| Tensile Modulus, 5 mm/min |
11720 |
MPa |
ASTM D 638 |
| Flexural Stress, brk, 2.6 mm/min, 100 mm span |
241 |
MPa |
ASTM D 790 |
| Flexural Modulus, 2.6 mm/min, 100 mm span |
11720 |
MPa |
ASTM D 790 |
| Hardness, Rockwell M |
114 |
- |
ASTM D 785 |
| IMPACT |
Value |
Unit |
Standard |
| Izod Impact, unnotched, 23°C |
427 |
J/m |
ASTM D 4812 |
| Izod Impact, notched, 23°C |
112 |
J/m |
ASTM D 256 |
| THERMAL |
Value |
Unit |
Standard |
| Vicat Softening Temp, Rate B/50 |
234 |
°C |
ASTM D 1525 |
| HDT, 0.45 MPa, 6.4 mm, unannealed |
215 |
°C |
ASTM D 648 |
| HDT, 1.82 MPa, 6.4 mm, unannealed |
212 |
°C |
ASTM D 648 |
| CTE, -20°C to 150°C, flow |
1.44E-05 |
1/°C |
ASTM E 831 |
| Relative Temp Index, Elec |
170 |
°C |
UL 746B |
| Relative Temp Index, Mech w/impact |
170 |
°C |
UL 746B |
| Relative Temp Index, Mech w/o impact |
170 |
°C |
UL 746B |
| PHYSICAL |
Value |
Unit |
Standard |
| Specific Gravity |
1.61 |
- |
ASTM D 792 |
| Water Absorption, 24 hours |
0.13 |
% |
ASTM D 570 |
| Water Absorption, equilibrium, 23C |
0.9 |
% |
ASTM D 570 |
| Mold Shrinkage, flow, 3.2 mm |
0.1 - 0.3 |
% |
S-Plastics Method |
| Melt Flow Rate, 337°C/6.6 kgf |
5.2 |
g/10 min |
ASTM D 1238 |
| ELECTRICAL |
Value |
Unit |
Standard |
| Volume Resistivity |
1.5E+16 |
Ohm-cm |
ASTM D 257 |
| Dielectric Strength, in oil, 1.6 mm |
24 |
kV/mm |
ASTM D 149 |
| Relative Permittivity, 1 kHz |
3.7 |
- |
ASTM D 150 |
| Dissipation Factor, 1 kHz |
0.002 |
- |
ASTM D 150 |
| Arc Resistance, Tungsten {PLC} |
5 |
PLC Code |
ASTM D 495 |
| Hot Wire Ignition {PLC) |
0 |
PLC Code |
UL 746A |
| High Voltage Arc Track Rate {PLC} |
4 |
PLC Code |
UL 746A |
| High Ampere Arc Ign, surface {PLC} |
4 |
PLC Code |
UL 746A |
| Comparative Tracking Index (UL) {PLC} |
5 |
PLC Code |
UL 746A |
| FLAME CHARACTERISTICS |
Value |
Unit |
Standard |
| UL Recognized, 94V-0 Flame Class Rating (3) |
0.25 |
mm |
UL 94 |
| UL Recognized, 94-5VA Rating (3) |
1.47 |
mm |
UL 94 |
| CSA (See File for complete listing) |
LS88480 |
File No. |
CSA LISTED |
| Oxygen Index (LOI) |
54 |
% |
ASTM D 2863 |
| NBS Smoke Density, Flaming, Ds 4 min |
1 |
- |
ASTM E 662 |
| Source GMD, last updated:02/24/2003 |
|
|
Your message must be between 20-3,000 characters!
English
